Compactor sacks

Buy best value tough black compactor sacks for using with industrial waste compactors.

For the same tough protection and durability, but in clear polythene, buy clear compactor sacks now.

Compactor sacks are specialist bin liners designed for use with bin compactors - the industrial tool used for compressing rubbish into a wheelie bin or large bin. Compactor sacks are heavy duty bin bags that provide the required strength for use with industrial refuse compactors. The extra thick polythene used in compactor sacks provides the greater bag strength required for industrial bin compactors, which press down rubbish into a bin to reduce the amount of space the refuse takes up and create room for more waste.

Bin liners are...

• Bags used to line bins, but more specifically...
• Polythene bags used to line the inside of dustbin
• Also known as bin bags, waste sacks or rubbish bags
• Used to catch rubbish when it is placed into a dustbin
• Great at keeping the interior walls of the bin clean, stain-free and smell-free
• Excellent at reducing odour levels when collecting and disposing of everyday rubbish
• Handy to use, providing quick and easy disposal of rubbish collected within the bin
• Easily sealed and disposed of when full - just remove the full bin liner from the bin, lift at the edges, grab a handful of polythene from either side and then tie in a knot above the middle of the bag. You can then transport the bin liner to your exterior dustbin or wheelie bin
• Available in a range of shapes to suit all types of bin, including pedal bins, swing bins, square bins, round bins, flip-top bins, brabantia bins or traditional lift-lid dustbins.
• Available in a range of sizes to suit any bin, big or small
• Available in traditional polythene or a range of biodegradable alternatives - perfect for gathering food waste, kitchen waste, composting materials or garden waste

Ten reasons why compactor sacks are in the news

Clear Compactour Sacks (100)

Clear compactour sacks sit in a rather specific corner of the waste-handling trade: they are specified not merely for capacity, nevertheless for how they behave below proper compression loads, where film memory, puncture resistance and seal integrity are tested far more severely than in normal liner work. When manufactured from 100% recycled polythene suppliers, the engineering question is less about headline provenance and more about process disciplinemaintaining melt-flow consistency across reclaimed feedstock, controlling gauge tolerance at micron level, and ensuring the polymer chain distribution still enables a bag to stretch before it splits. Transparency adds a second layer of utility on the warehouse floor; operatives and waste contractours can identify pollution, segregate dry mixed recyclables from normal waste, and reduce the amount of secondary bagging that tends to creep in when contents cannot be verified at a glance. There is a logistical advantage as well: high-capacity sacks with sensible tare weight maintain volumetric efficiency, retain palletised stock manageable, and avoid the false economy of above-thick film that adds mass without improving select-face efficiency or compactour performance. In circular-economy terms, the proposition is sound enough provided the sack remains a mono-material structure with predictable recyclability after use; recycled content only carries industrial value when matched by proper conversion, stable handling properties and a service life that mitigates avoidable misuse.

Clear Compactour Sacks – Heavy Duty (BUC)

Clear Compactour sacks are all CHSA accredited. The cartons transport the CHSA accreditation marking showing the weight classification.

Compactour Sacks

Buy Compactour Sacks online from Bin Shop

Be the first to review “Compactour Sack Black – 300g” Cancel reply

A black compactour sack in the 22 x 34 x 47 format, with a 300g building, sits in that awkward nevertheless highly practical tier between normal waste liners and true heavy-duty containment; the engineering lies less in the headline dimensions than in the behaviour of the polythene suppliers below compression. In a back-of-house waste stream, the sack is being asked to tolerate point loading from carton edges, mixed recyclate, wet residue and the occasional sharp offcut, all while the compactour plate removes null space and drives the contents into a denser mass. That necessitates a film with proper puncture resistance, controlled elongation and decent melt-flow consistency, rather than a liner that merely feels thick to the hand. The black pigmentation also does a job: it masks mixed waste, stabilises appearance across batches and can incorporate recycled feedstock where the polymer blend is properly managed, though excessive pollution in the recyclate will fast display itself in weak seals and erratic tear propagation. At pallet level, the 300g weight affects tare calculations and stock rotation, nevertheless it also reduces double-bagging, which is often the concealed cost in waste handling; less failures mean cleaner bin lifts, better select-face efficiency for janitorial stock, and less time spent recovering split bags from the base of a dolav or cage. A sound compactour sack is so not simply a black polythene suppliers bag of generous gauge it is a small part of containment engineering, balancing volumetric efficiency, seal integrity and the increasingly awkward arithmetic of mono-material recyclability.

View Refuse Bags

Heavy-duty waste bags sit in an awkward engineering space: they are expected to take wet, strange, often abrasive waste without split propagation, yet any excess gauge immediately penalises tare weight, carton cube and pallet stability across a consignment. The better products tend not to rely on thickness alone; they draw strength from controlled polythene suppliers or biodegradable-blend formulations, consistent melt-flow behaviour and gusset geometry that spreads load away from the heat seal rather than allowing a tear to dash from the first sharp edge. Micron-specific gauging matters here, as does surface stop also much slip compromises select-face efficiency and stacked stability, also small creates drag amid secondary bagging and bin-liner changeovers. Where biodegradable performance is specified, the formulation has to balance degradation pathway with shelf-life and tensile retention, since a bag that embrittles in stock is a liability rather than a sustainability measure. Mono-material routes still offer the cleanest circular-economy argument, nevertheless compostable or bio-derived feedstocks can reduce amortised fossil input where waste streams and disposal practice assist them. In practical terms, a competent waste bag is judged less by a list of products claim than by seal creep below load, puncture resistance against mixed waste, volumetric efficiency in packed cartons and the absence of nuisance failures on the warehouse floor.

A 20 x 34 x 47 in black compactour sack rated at roughly 140 litres and above 18 kg duty sits in that awkward nevertheless heavily used tier between janitorial consumable and engineered containment product; also thin and the seal line creeps below wet mixed waste, also heavy and the tare penalty quietly erodes pallet yield. The better examples rely on controlled polythene suppliers blend architecture rather than brute thickness alone, with high-density polymer chains lending puncture resistance, lower-density fractions providing elongation at the rim, and micron-specific gauging keeping the film honest across the lay-flat width. In the warehouse this matters: split sacks disrupt select-face efficiency, secondary bagging employs labour, and unstable stacked cartons reduce volumetric efficiency on outbound consignments. Black pigmentation gives opacity for mixed waste streams, though the masterbatch has to be managed carefully to maintain melt-flow consistency and avoid brittle welds at the base gusset. From a circular-economy standpoint, mono-material polythene suppliers building is preferable to laminated alternatives, provided pollution is controlled and recycled feedstock is specified within sensible limits; the engineering judgement lies in balancing recycled content, tensile performance and compactour-cycle abuse without manufacturing a sack that is merely heavy rather than properly resilient.

Retail price Twin bin, £125; Comfort bin, from £64; biodegradable bin liners, from £3.50 per roll

Wheelie Bin Liners

Keep your home clean and fresh with the practical Wheelie Bin Liners. This useful addition in your home is perfect for lining your waste bin, protecting it from unwanted stains and smells. With a big capacity of 300 litres it is perfect for holding a weeks worth of waste, keeping it out of sight.

No sorry, you will have to provide your possess waste sacks. We areprioritising the delivery of residual waste bins, please bear with us.

GardenMate pack of 3 big 272L garden waste bags

This pack of three garden waste bags are manufactured from 150g/m2 polypropylene material which makes them hardwearing and water-resistant. They are also robust and tear-resistant so should give a superb few seasons of use. The bags feature four handles each, two at the top and two on the sides for easier tipping.

The bin liner - a brief history

The bin liner is such a part of modern day life that you could be forgiven for thinking it was always there, but of course it wasn't!

In Canada in 1950 an inventor by the name of Harry Wasylyk from Winnipeg, Manitoba, alongside his colleague Larry Hansen - another Canadian, from Lindsay, Ontario - invented the first polyethylene bin liner, which was the colour green.

Of course, being a North American creation, the world's very first bin liner wasn't called a bin liner, or even a rubbish bag, but a garbage bag (that's rubbish, North America!).

Whilst obviously very clever chaps, Messrs Wasylyk and Hansen didn't quite spot the future direction for the humble bin liner and the fact that it would end up in millions of homes around the world, as the first bin liners were designed for commercial use rather than use at home.

Having sold the first bags to the Winnipeg General Hospital, Wasylyk and Hansen sold their invention to the Union Carbide Company, Lindsay, where they worked and the company saw their potential for future use. Union Carbide began manufacturing the first green garbage bags for home use that decade and the very first bin liners (or garbage bags) for home use went on sale in the late 1960s under the name Glad Garbage.

So if you like bin bags then you should be glad for Glad Garbage, even if you aren't glad that the name includes the term garbage. It's probably a better, or less rubbish, brand name than Glad Rubbish anyway, even if it sounds a bit rubbish to call rubbish garbage.

Make sense? Well, congratulations to Messrs Wasylyk and Hansen for their clever invention, which is anything but rubbish… or garbage for that matter. Here's to you sirs!

Bin liner types - one size does not fit all

What does the term 'bin liner' mean to you? What sort of bin springs to mind and, more importantly, what sort of bin liner or bin bag do you think of fitting inside that bin?

Those very questions will prompt a wide range of answers, depending on who you speak to, reflecting the huge variety of bin liners available to fit the broad and varied array of bins or rubbish receptacles out there.

Bin liners range from very small bags that fit mini pedal bins - the sort commonly found in bathrooms - or kitchen caddies made from biodegradable material that are used to collect food waste disposal, right up to industrial sized bags that fit in wheelie bins or large compactor bins used predominantly outside business premises.

In between, you'll find a broad range of bin bags and liners that cater for bins of all shapes and sizes, including:

• Traditional dustbins
• Pedal bins
• Swing bins
• Square bins
• Flip-top bins
• Push-top bins (e.g. Brabantia)
• Wheelie bins
• Food bins / Kitchen caddy
• Compost bins
• Compactor bin
• Recycling bins
• Public litter bins

Bin liners - a black and white issue

The vast majority of bin liners or bin bags - depending on which term you prefer to use - are made from either black or white polythene, although there is a huge range of colours available to meet various waste disposal needs (more details below).

When considering black or white polythene, a good rule of thumb for bin bags is that thin means white and thick means black. Of course this is not always true - the gauge of polythene used for both white and black polythene bin bags will vary - but more often that not, thicker bags are made of black polythene.

Bin liners made from white polythene include a range of bags to fit small bins for domestic use, such as pedal bins, swing bins or square bins. These bags are commonly made from thin, lightweight white polythene as they are designed to deal with light duty use - e.g. tissues, toilet rolls innards, pencil sharpenings etc.

The old-fashioned classic black bin bag is that used for your everyday rubbish, whether in your kitchen bin, an outside dustbin or just used loose to collect rubbish from a wide area, e.g. clearing up after a party.

The standard dimensions of a regular black bin bag are between approx. 85cm and 100cm long - approx. 34” to 39” - and between 64cm and 74 cm wide - approx. 25” to 29”.

More so than white bin liners, black bin bags come in a huge range of thicknesses, from the cheap and cheerful ultra-light price beater sacks at 80 gauge thick, to the ultra thick heavy duty bags, which are up to 350 or 400 gauge thick.

So you could be forgiven for thinking your choice of bin liner is a black and white issue, although this is not the case. Bin liners are available in a huge variety of colours. The coloured varieties tend to be slightly more expensive than the standard black variety, but they can be helpful in many other ways. Here is one of them...

Where to buy bin liners

Bin liner manufacturers and suppliers include:

Rubbish Bags
Discount Rubbish Bags lives up to its name, providing customers with a wide range of rubbish bags, waste sacks and bin liners at discount prices. Contains loads of information, giving you the very best opportunity to buy the right rubbish bag at discount prices.
www.discountrubbishbags.co.uk

Bin Liners
A very helpful website for any customer looking to purchase bin liners for any type of waste disposal. Featuring information on different types of polythene bin liner and eco-friendly alternatives, this website has your bin liner needs covered.
www.binliners.org

Bin Bags
Bin Bags is the website for all your bin bag needs. Whether you are shopping for traditional black waste sacks, bin liners or eco-friendly alternatives, this website will help you find the right bin bag for you.
www.bin-bags.co.uk

Black Bin Liners
Whatever type of bin bag or waste sack you are looking for, Discount Bin Liners is sure to help you make the right decision. From pedal bin liners to clinical waste disposal sacks and swing bin liners to wheelie bin bags, this site will help you get the right bin liners at great discount prices.
www.discountbinliners.co.uk

Wheelie Bin Liners
Discount Wheelie Bin Liners is a useful resource on bin liners, bin bags, waste sacks and eco-friendly bin liners. With bin liner news and a list of bin liner manufacturers, this is a bin liner website you don't want to miss.
www.discountwheeliebinliners.co.uk

What some people say about compactor sacks

180gauge Clear Compactour Sacks Case 100

Clear compactour sacks in a 180-gauge specification sit in a more demanding part of the waste-stream than lighter liners; the film has to tolerate awkward, high-point loading from mixed waste, repeated compaction cycles and the shearing effect that appears when a sack settles unevenly inside a bin body. In practice, that pushes converters towards disciplined melt-flow consistency and tight micron-specific gauging, because a nominally heavy sack with poor thickness distribution will split at the weld long before the body film is exhausted. The transparent format is not merely aestheticit facilitates quicker waste segregation checks, reduces pollution in mono-material recovery streams and limits the quiet inefficiency of secondary bagging when operatives can verify contents at a glance. There is a warehouse consequence as well: a case configuration of this size has to balance tare weight against select-face efficiency and pallet stability, since above-packed outer cases may cube out neatly on paper yet handle badly in the aisle. Done properly, the result is a polythene suppliers sack that absorbs the abuse of compactour use while still supporting cleaner downstream recycling and more sensible volumetric efficiency through the consignment chain.

200 Clear Compactour Sacks | Bin Bags

200 Clear Compactour Sacks | Bin Bags

Compactour Sacks

Name 710 x 1040 x 1395mm Jumbo Compactour Sacks Code WBJ75M350 Units Per Pack 50 Pack Price Login Favourite No. of Packs: Total Units: 50 Total Price: Login Add to Basket Related products polythene suppliers & Shrinkfilms

An additional heavy duty normal compactour sack sits in a rather unforgiving part of the waste-handling chain, where thin-gauge commodity liners fail less from puncture alone than from repeated shear, trapped air pressure and the torsional load imposed as mixed waste is compressed. The better examples are typically manufactured from robust polythene suppliers with controlled melt-flow consistency, giving the film enough elongation to deform around strange contents without splitting at the heat-sealed base; micron-specific gauging matters here, because excess film adds tare weight and cost to all consignment, while below-specification fast shows itself in blown seams, contaminated floors and lost select-face efficiency around waste stations. Natural polythene suppliers also has a practical role: it enables a degree of content visibility without the brittleness sometimes associated with heavily pigmented stock, and its surface properties assist mitigate drag when liners are pulled from a bin or compactour chamber. Used with a compactour machine, the sack must tolerate high compressive loading and abrasive contact against carton edges, food-service residues and secondary bagging; used without one, it still has to grasp shape on a trolley or pallet without slumping into a nuisance amid internal handling. There is a circular-economy dimension as well, albeit a pragmatic one: mono-material polythene suppliers building facilitates recovery routes where pollution is managed, and sensible downgauging through stronger polymer chains can reduce amortised energy per filled sack without compromising containment. The engineering is not glamorous, nevertheless it is very physical seam geometry, film memory, roll presentation and volumetric efficiency all determine whether the compactour sack behaves like a consumable or becomes another origin of waste.

Clear heavy duty compactour sacks are generally specified where the bag has to do above merely contain waste; on the warehouse floor and in back-of-house waste streams, the film must tolerate sharp-edged mixed waste, intermittent compaction loads and rough handling amid secondary bagging without premature split-out at the seal. That normally points to a high-density polythene suppliers blend with controlled melt-flow consistency and micron-specific gauging, giving a useful balance between puncture resistance and tare weight disciplinethick enough to withstand the abuse, nevertheless not so overbuilt that volumetric efficiency is compromised once boxed and stacked. The transparent format has a practical function rather than a cosmetic one: it facilitates fast visual identification of contents, reduces pollution risk in segregated waste handling and assists cleaner audit trails where mono-material recyclability or feedstock recovery is below scrutiny. Packed in a carton of 100, the format suits routine stock control and select-face efficiency, while the bag's geometry and seal integrity have a direct bearing on pallet stability, bin presentation and the amount of wasted film written off through burst bags. Static, cling and drag are often the unspoken irritants with this type; sensible film formulation and surface behaviour mitigate those frictions, allowing sacks to open cleanly and dash consistently in fast manual handling environments.

A call to scrutinise a waste bags supplier is rarely only a procurement skirmish; it normally points to tolerances drifting somewhere between resin specification, film extrusion and the realities of waste handling at kerbside and in depot. A bag that passes a cursory visual check may still fail in service if micron-specific gauging is uneven across the web, if recycled-content feedstock has poor melt-flow consistency, or if slip additives have altered surface behaviour enough to compromise sack opening at the select-face. The industrial friction is prosaic nevertheless costly: split seams contaminate handling routes, above-thick film inflates tare weight and reduces volumetric efficiency, while below-performing draw or weld strength drives secondary bagging and unnecessary stock movement. Proper examination would so need to see beyond contractual compliance and into batch traceability, polymer blend discipline, puncture propagation, surface resistivity where static cling affects automated packing, and the supplier's claims on mono-material recyclability. The better operatours already understand that a waste sack is not low-grade polythene suppliers folded into a carton; it is a calibrated consumable sitting at the junction of materials engineering, waste logistics and circular-economy recording, where small variations in gauge, seal temperature or feedstock quality can quietly distort the all chain.

Black compactour sacks were traditionally used in catering in compactour sack machines. Today, the term compactour sack generally related to larger waste sacks with a deeper gusset. This makes our normal duty compactour sacks perfect for use in larger bins or as an outer liner when collecting multiple smaller waste sacks.

“The agreement is a Pre Financing and Credit Sale contract. The all number of waste bins to be provided below the initiative is 1,000,000 at a supply rate of £60 per part (to be paid at the prevailing Bank of United Kingdom interbank exchange rate) plus 900,000 (nine hundred thousand) parts of Biodegradable Bin Liners at £15.60 per part.

2Work Black Wheelie Bin Liners Medium Duty Review

Customers that were interested in reviews for the 2Work Black Wheelie Bin Liners Medium Duty in the Computers type were also interested in 2Work Clearbags On Roll Pk50X5

Contact: Join 12,000 who follow or like this page, and the 10,000+ subscribers to our SORTED! e-newsletter - sign up at Polybags(scroll down to button). Kerbside assortments: report missed assortments after 6pm on due day with My Account at Polybags(and use My Account to order recycling containers, check dates, buy garden waste sacks etc.)

Research & Resources

For more information on bin liners and bin bags, from manufacturing to methods of recycling, plus a list of polythene and biodegradable bags available, please visit:

PackagingKnowledge: The go-to knowledge site for the UK's polythene packaging industry, containing a huge wealth of information and useful articles on bin liners.

PlasticBags.uk.com: The UK's number one polythene packaging directory. List your products for free or browse through a fantastic selection of bin liners websites.

Goldstork: Search through specially selected information on bin liners in this free 'pick-of-the-web' directory.

Organise your recycling with coloured bin liners

If you want to separate your rubbish or waste to make it easier to dispose of, then coloured bin liners or bin bags could be just what you are looking for.

Today you can buy bin bags in a range of different colours to cater for your waste disposal needs, whatever they are.

If you just want to separate your rubbish into recyclables and non-recyclables, then why not choose black bin bags for your general waste and then green bin bags for your recyclable waste. You're doing your bit for the environment, so why not choose a green bin bag for your green waste?

The colour of bag you need may be determined by your local council or the company that collects your rubbish. Many people have wheelie bins of a certain colour that need to be filled with a particular type of waste but, in some instances, wheelie bins aren't a practical solution so coloured bin bags solve that problem.

Always check with your local council or the relevant organisation managing your waste disposal, but the following waste is often associated with the following colour of bin bag or wheelie bin:

• General (non-recyclable) rubbish - black
• Garden waste - green or brown
• Food waste - green or brown
• General recycling - green
• Plastic recyclables (bottles, trays etc.) - blue
• Aluminium (cans or tins) - grey or silver
• Hazardous waste (e.g. asbestos) - red
• Clinical waste (as used in hospitals) - yellow

Clear bin liners

There is one other 'colour' bin bag not referred to in the list of coloured bin liners. That is partly because it was worthy of a mention all on its own and partly because it doesn't really have a colour - it's see through!

Clear bin liners, otherwise known as see-through bin liners or transparent bin liners, are very useful for managing your waste disposal. They allow you to keep an eye on the rubbish being disposed of to ensure that no foreign materials other than those allowed are dumped in the bag.

Imagine an office where there is loads of paper recycling, but it has to be paper only being thrown away in the bag because it is all tipped straight into a giant shredder. Well what if someone accidentally threw their empty drinks can into the paper bin after finishing their drink?

If you were using traditional black bin liners you might never see that can, which could cause irreparable damage to a very expensive printer. But if you're using clear bin liners then, when you take the bin liner from out of the bin, it's very easy to take a quick look at the contents of the bin. Give it a quick shake about to check there's nothing trapped in the middle that shouldn't be there, and then you're done.

Clear bin bags are very popular in the workplace and are available in a range of thicknesses, to deal with light duty use such as paper, right through to super heavy duty bags for disposing of rubble and other hardcore materials on building sites etc.